Top 5 Fish Mistakes – #2: Disorganized Cleaning

Top Fish Mistake #2: Disorganized Cleaning

How often do you clean your fish’s home? Do you have a regular schedule or do it whenever? No matter what kind of fish you have in either a tank or a pond, a routine cleaning regimen is essential to good fish health.

Go through the following checklist and see how much you do:

  • Clean filtration by backwashing sand or bead filter or rinsing or shaking matting or bio balls
  • Scrub the sides of the tank/pond
  • Clean the bottom of the pond using a vacuum or gravel siphon your tank
  • Water change through backwashing or siphoning
  • Check water chemistry using a drop-based test kit

If you’ve never heard of some or any of the above checklist items, now’s the time to start. Buy the equipment you need to get going and start with removing about 10% of the tank/pond water every other week. Get your kids or help or hire a maintenance service if you are unable or don’t want to clean it yourself. Purchase a test kit so you can follow your water chemistry as your system changes. Buy a test kit here.

Minimal or no system cleaning can lead to “Old Tank/Pond Syndrome.” In these cases, the water has sat around for so long that it’s eaten up all of its buffering capabilities, sending your pH crashing into the 6.0 range. Your fish are fine for now, since they’ve slowly adapted to the change and the low pH protects their gills from absorbing the toxic levels of ammonia wafting around your system. But I bet you’ve seen some low levels of chronic disease and death for the last few months? Don’t just go dumping a bunch of buffers or 100% water changes and expect your fish to survive! When correcting this problem, slow and steady water changes are what will get your fish through this problem alive.

If you do everything on our checklist, and on a regular basis, we are so thrilled to hear it! But did you know that you could be over cleaning your system if you do it too regularly or too thoroughly? Your filtration needs to have some layer of scum on it where those good bacteria can live and thrive. If you blast your filters until they’re pristine, you’re hitting the reset button on your whole filtration system. It’s the same as starting with a completely new system. It takes 4-6 weeks minimum for those good bacteria to start colonizing your filters. You can try quick start bacteria products, but we’ve tried them ourselves and seen no escape from that 4-6 week time frame.

Similar to not cleaning enough, over-cleaning can resemble “New Tank/Pond Syndrome.” In a system where bacteria have not been able to colonize or are never given the chance, you’re looking at a lot of ammonia and nothing else. No nitrite or nitrate will appear in your testing until those bacteria get to munching. In order to avoid this, try to avoid over cleaning with your trusty power washer and instead give your filtration a good shaking or very light rinse.

Here’s our friend, the Nitrogen Cycle, for reference.

Review your nitrogen cycle!

Review your nitrogen cycle!

Your maintenance regimen will vary with daily to weekly to monthly chores. Clean off floating debris daily and check your skimmer. Always check that your equipment is functioning properly. Make sure you have the contact information for a pond professional on hand to help with any emergencies. Follow our checklist for every two weeks to start, then start extending it by a week and keep an eye on your water chemistry. This will get you on the path for good water quality and happy fish!

Watch the complete FREE webinar here

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: